GLsun Mall (glsun)
-
What Do You Know About MPO Fiber Patch Cords?
MPO patch cord, MPO (Multi-fiber Push On) connector is one of the MT series connectors. The ferrules of MT series are connected with holes at 0.7mm diameters and pins. MPO fiber optic cables are divided into transfer type and non-transfer type. There are many types of transfer MPO jumpers, such as ribbon MPO jumpers, beam MPO jumpers, and PO jumper fan-out through the splitter.While defined as an array connector having more than 2 fibers, MPO Connectors are typically available with 8, 12 or 24 fibers for common data center and LAN applications. The type of connector is specified by the customer, FC, LC, SC, ST and other types are optional.The compact design of MPO connector makes the patch cords more cores and smaller in size.
about 7 months ago from web -
Introduction of PON
PON Passive Optical Network is a point-to-multipoint passive optical fiber access technology, which mainly includes three basic functional modules: Optical Line Terminal OLT, Optical Network Unit ONU, and Optical Distribution Network ODN.
about 7 months ago from web -
40G QSFP+ Optical Module Introduction
As an upgrade version of the Quad Small Form-factor Pluggable (QSFP), QSFP+ is a compact, hot-pluggable optical module that can transmit data at up to 40Gbps. It conforms to the SFF-8436 protocol and the QSFP Multi-Source Agreement (MSA). QSFP+ has four independent optical signal sending and receiving channels with a rate of 10Gbps and a total bandwidth of 40Gbps. In the application scenarios of data center, high performance computing network, enterprise core layer and distribution layer, 40G QSFP+ optical transceiver module can provide high-density and low-power 40G Ethernet connection transmission applications.
about 7 months ago from web -
OTN Principles and Equipment Introduction
Wavelength Division Multiplexing: Multiplexing optical signals of different wavelengths into the same optical fiber for transmission, this method is called wavelength division multiplexing (WDM). Features: Multi-wavelength multiplexing/high-speed long-distance transmission/optical layer monitoring and management.
about 7 months ago from web -
25G SFP28 Optical Transceiver Modules Introduction
With the advent of 5G era, the related optical communication technology is also developing rapidly. Compared with other optical transceiver modules, 25G optical transceiver modules are more widely used. The biggest advantage of 25G Ethernet technology for the data center is that it can maximize the bandwidth and port density, and it can also use 25Gb/s single-channel physical layer technology to achieve 100Gb data transfer, which can provide the most energy efficient way to meet the growing needs of the next generation data center network.
about 7 months ago from web -
What's PON? GPON vs EPON vs 10G PON
Optical networks rely on optical fibers and other optical hardware to form the network of the Internet. Outside home or office, the power cable is usually connected to the optical cable, which provides the interconnection between the data center and the optical line terminal (OLT) of user's end. There are many optical network technologies, such as passive optical network (PON).
about 7 months ago from web -
FP Laser vs DFB Laser, DFB Laser vs DBR Laser
A Fabry–Pérot laser diode (FP laser diode) is the most common type of laser diode, having a laser resonator which is a Fabry–Pérot interferometer. This means that substantial light reflections occur at both ends, but not within the gain medium.
about 7 months ago from web -
Introduction of Fiber Optic Cables
As one of the most basic components of optical network wiring, the fiber optic cables are widely used in the construction of optical fiber links. Nowadays fiber manufacturers launch various types of fiber optic cables to meet application of diversified project, such as fiber optic cables with types of connectors (MPO/LC/SC/FC/ST), simplex/duplex fiber optic cables and single-mode/multi-mode fiber optic cables etc. Each type of fiber optic cables has its own characteristic, and be irreplaceable. This article would be a detailed introduction of fiber optic cables or a guide for you to choose in wiring.
about 7 months ago from web -
100G QSFP28 SR4 vs LR4 vs PSM4 vs CWDM4 vs ER4
100G QSFP28 optical transceiver module is suitable for 100G Ethernet, EDR InfiniBand and 32G Fiber Channel, and generally it has exactly the same volume and panel density as 40G QSFP+.
about 7 months ago from web -
Basic Manufacturing Process of Laser Chip
The manufacturing process of a laser chip is similar to that of a semiconductor chip. It must go through a series of processes such as silicon wafer manufacturing, IC design, IC manufacturing, and IC packaging and testing, and finally make into a small chip.
about 7 months ago from web -
Differences Between SFP, SFP+, SFP28, QSFP+ and QSFP28
SFP, SFP+, SFP28, QSFP+ and QSFP28 are all package types of optical transceiver modules. These hot-swappable optical transceiver modules can be used to connect network switches and other network devices for data transmission. Before figuring out the differences between these package types, we need to know what packages are SFP, SFP+, SFP28, QSFP and QSFP28.
about 7 months ago from web -
What Is Transponder and Muxponder
Data centers and service providers face the increasing demands for data security, low latency, higher speeds and longer distances in networks. Transponders and muxponders are both key elements that receive and send the signals over the fiber in an optical transport network.
about 7 months ago from web -
ypes of 10G SFP+ Optical Transceiver Modules
10G SFP+ transceiver is an enhanced version of SFP transceiver module. It provides various of 10 Gigabit Ethernet connectivity options for data centers, enterprises and Internet Service Providers applications. It supports 8 Gbit/s Fibre Channel, 10 Gigabit Ethernet and Optical Transport Network. 10G SFP+ transceivers include SR, LR, LRM, ER, ZR, BiDi CWDM and DWDM series.
about 7 months ago from web -
Optical Amplifier EDFA for WDM System
Erbium-Doped Fiber Amplifier (EDFA) is an optical amplifier used in the C-band and L-band, where the loss of telecom optical fibers becomes lowest in the entire optical telecommunication wavelength bands. It is used in the telecommunications field and in various types of research fields. An EDFA is "doped" with a material called erbium. Optical amplifiers can directly amplify optical signals without converting the signals into electrical signals before amplification, which is also the most prominent function and is an important optical component in long-distance optical communication.
about 7 months ago from web -
Taking a Look at DWDM Transceivers
DWDM transceiver adopts DWDM technology to multiplex different wavelengths or several optical signal on the same fiber to save valuable fiber resources. DWDM SFP transceiver is a popular kinds of compact DWDM SFP transceivers used in communications for both telecommunication and data communications.
about 7 months ago from web -
What Are the Common Used Optical Devices in DWDM System
Dense wavelength-division multiplexing (DWDM) is an optical fiber multiplexing technology that is used to increase the bandwidth of existing fiber networks. It combines data signals from different sources over a single pair of optical fiber, while maintaining complete separation of the data streams. This is a laser technology used to increase bandwidth over existing fiber optic backbones. DWDM technology is an extension of optical network, the main advantage of DWDM is that it is independent of protocol and transmission rate, DWDM-based network can transmit data in IP, ATM, SONET, SDH and Ethernet.
about 7 months ago from web -
Basic Knowledge About Optical Transceiver Modules
Optical transceiver module is the core part of optical communication devices. It uses fiber optical technology to send and receive data through completing the process of optical signal - electrical signal or electrical signal - optical signal conversion. The optical transceiver module mainly include optical signal input interface, receiver, transmitter, integrated circuit design, radio frequency circuit, digital monitoring and mechanical support part. Optical modules can be widely used in wired network connections such as servers, storage, and networks.
about 7 months ago from web -
What is Fiber Optical Cable Monitoring System
The fiber optical cable monitoring system monitors the fiber optical cable and then judges whether the optical cable is in normal operation; when the abnormal situation occurs, alarms will be issued and corresponding tests will be sent. In addition, through the judgment of fault data the position where fault occurred can be accurately located, the faulty equipment and the reason causing the fault can be quickly ascertained
about 7 months ago from web -
What's the difference of CWDM, DWDM and CCWDM
A WDM system uses a multiplexer at the transmitter to join the several signals together and a demultiplexer at the receiver to split them apart. There are multiplexer(MUX) and demultiplexer(DEMUX).
about 7 months ago from web -
What is Optical Circulator in Optical Communication
Optical circulator is a multi-port optical device with nonreciprocal property. It is based on the nonreciprocal polarization of an optical signal by Faraday effect. When an optical signal is input from any port, it can be output from the next port sequentially with very low loss, and the loss from this port to all other ports is very large, so these ports are not communicating with each other
about 7 months ago from web
All The Top Link content and data are available under the